30 awg eye speed ? ms twinax ribbon cable 6qdp?032?06.0?str?ttr?2 6qdps?016?06.0?str?teu?3?b optional shielding differential pair routing increased insertion depth www.samtec.com f-209 supplement mates with: qmss-dp, qfss-dp, qms-dp, qfs-dp specifications for complete speci cations see www.samtec.com?6qdps or www.samtec.com?6qdp cable: 30 awg eye speed ms twinax micro ribbon signal routing: 100 differential cable bending radius: (11,11mm) 7/16" min plating: au over 50? (1,27?) ni current rating: 1 a max propagation delay: 4.67 nsec/meter operating temp range: -20? to +90? skew (pair-to-pair): <10 ps/ft skew (within a pair): <5 ps/ft emi performance: fcc class a rohs compliant: ye s no. of pairs end no. 1 wire length end no. 2 specify end assemblies from chart wiring option ?1 = pin 1 to pin 1 ?2 = pin 1 to pin 2 ?3 = pin 1 to second last pin ?4 = pin 1 to last pin screw option leave blank for no screw option ?f = end no. 1 ?s = end no. 2 ?b = both ends ??xx.x? = wire length in inches (95,3mm) 03.8" minimum 0,635 mm twinax cables (7,47) .294 oal = wire length + l wire length (1,27) .050 assembly surface mount ?ttr = t erminal, t op, notch r ight ?ttl = t erminal, t op, notch l eft ?tbr = t erminal, b ottom, notch r ight ?tbl = t erminal, b ottom, notch l eft ?str = s ocket, t op, notch r ight, ?stl = s ocket, t op, notch l eft ?sbr = s ocket, b ottom, notch r ight ?sbl = s ocket, b ottom, notch l eft end 2 end 1 064 064 001 001 064 06 4 001 001 001 001 064 064 001 001 064 064 end to end l (23,88) .940 (21,08) .830 (20,35) .801 (18,29) .720 (17,55) .691 (16,81) .662 surface mount to surface mount surface mount to edge mount (terminal) surface mount to edge mount (socket) edge mount (terminal) to edge mount (terminal) edge mount (terminal) to edge mount (socket) edge mount (socket) to edge mount (socket) wiring option end options ttr, tbl, stl, sbr, teu to ttr, tbl, stl, sbr, ted or ttl, tbr, str, sbl, ted to ttl, tbr, str, sbl, teu wiring requirements ttl, tbr, str, sbl, ted to ttr, tbl, stl, sbr, ted or ttr, tbl, stl, sbr, teu to ttl, tbr, str, sbl, teu 1 or 2 3 or 4 end no. 1 (-ttl shown) end no. 2 (-str shown) assembly edge mount ?teu = t erminal, e dge, notch u p ?ted = t erminal, e dge, notch d own end 2 end 1 064 001 001 064 6qdps, 6qdp series 6qdps = shielded mates with qmss-dp/ qfss-dp 6qdp = unshielded mates with qms-dp/qfs-dp ?016, ?032, ?048, ?064 type note: this series is non-standard, non-returnable. note: verify part number and correct wiring scheme with samtec s interactive cable builder at www.samtec.com/cable_ builder/pitch.asp note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. cable length 6" (152,4mm) 12" (304,8mm) 19.68" (0,5m) 39.37" (1m) 6qdps 4.0 ghz / 8.0 gbps 3.72 ghz / 7.44 gbps 1.38 ghz / 2.76 gbps 1.04 ghz / 2.08 gbps rated @ -3db insertion loss applications processing conditions will affect mated height. (15,11) .595 (24,13) .950 (12,70) .500 (6qdps) applications
|
